Screening of polymers on selected Hawaii soils for erosion reduction and particle settling     

James A. Teo  Chittaranjan Ray  Samir A. El‐Swaify 《水文研究》2006,20(1):109-125

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

高压技术在深海沉积物兼性嗜压菌的筛选和鉴定中的应用     

游志勇  汤熙翔  肖湘 《台湾海峡》2007,26(4):555-561

通过自行改进的高压培养罐及高压设备,对深海沉积物进行可培养微生物的筛选,获得6株具有较强耐受压力的细菌.16SrDNA的测序结果表明这些细菌分别属于6个不同的菌属.压力生长试验的结果表明这6株细菌在40MPa的条件下仍然具有较强的生长能力,属于兼性嗜压菌.对不同压力下生长的细菌做显微镜检,结果显示,除了一株芽孢杆菌在40MPa下的菌体形态发生了明显的变化外,其它5株细菌在压力条件下的菌体的分裂均没有受到明显的影响.  相似文献   

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach   总被引：2，自引：0，他引：2  

Liu Jiaju Zhang Jingchao Prof. Senior Engineer  River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing Senior Engineer  River  Harbour Department  Nanjing Hydralulic Research Institute  Nanjing 《中国海洋工程》1992,(2)

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.  相似文献   

大型桥梁钢沉井下沉过程局部冲刷研究     

高正荣  黄建维  赵晓冬 《海洋工程》2006,24(3):31-35

钢沉井下沉过程中局部冲刷的研究是同类桥墩设计和施工十分关心的重要课题,它对保证钢沉井安全有效施工、桥梁设计中施工期桥墩最大冲深、失稳和安全计算有重要参考价值。通过室内试验研究了钢沉井下沉过程中的局部冲刷机理和冲刷形态,探讨了桥墩下部钢沉井基础施工的相对高程对局部冲刷的变化规律,并将试验研究所获得的局部冲刷规律和影响因素,采用墩型系数方法引入局部冲刷计算中,给出了计算公式。研究成果补充了国家行业规范内容,对同类工程的设计、施工具有借鉴和指导意义。  相似文献   

Lower Cd/P ratio in settling particles than in surface seawater in the Okinawa Trough     

Kazuo Abe  Kazuo Iseki  Kazumaro Okamura  Yoko Kiyomoto 《Journal of Oceanography》2006,62(5):745-752

The characteristics of the ratios between cadmium (Cd) and phosphorus (P) in settling particles collected from the Okinawa Trough in the East China Sea were examined using a sediment trap, moored at a depth of 811 m for one year. The Cd/P ratios varied within a narrow range throughout the year, in spite of the large seasonal change in the total dry mass, Cd, and P fluxes. The average Cd/P ratio of settling particles was 0.062 (nmol/μmol), which was obviously lower than that of surface seawater around the study site (0.16). This lower ratio in the Okinawa Trough particles collected using the 811 m-moored trap certainly reflected the mixture of biologically produced organic matter around the study site and other components that were mainly transported as lateral flux from the shelf edge and slope area of the East China Sea.  相似文献   

Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure     

Carl T.F. Ross  Andrew P.F. Little  Kehinde A. Adeniyi 《Ocean Engineering》2005,32(1):753-36

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.  相似文献   

江苏大丰潮滩悬沙级配特征及其动力响应   总被引：1，自引：5，他引：1  

李占海  高抒  沈焕庭  汪亚平 《海洋学报》2006,28(4):87-95

根据2002和2003年夏季在江苏大丰潮滩的现场观测资料,详细分析了悬沙级配的时空分布特征、影响因素及其对再悬浮、沉降和流速的响应.研究结果表明,悬沙颗粒较细,以粉砂为主,悬沙级配在潮周期内的变化模式有两种类型:一是稳定型,悬沙级配的时空(垂向和平面)变化很小;二是双峰型,悬沙级配的时空变化显著,粗细峰高度不断变化.再悬浮、沉降、涨潮时输入潮滩的悬沙和底质级配是影响悬沙级配的重要因子.再悬浮使粗颗粒悬沙的含量增加,悬沙与底质级配不断接近,沉降对悬沙级配的影响与再悬浮相反.再悬浮发生时悬沙级配对流速有明显响应.在没有再悬浮和沉降影响的情况下,潮滩不同部位、不同时间的悬沙级配趋于稳定和相同,对这种状态下的悬沙级配可称为背景悬沙级配,大丰潮滩背景悬沙级配的平均粒径为7μm.  相似文献   

长江河口三角洲区有孔虫沉降速度试验   总被引：7，自引：0，他引：7  

朱晓东 《海洋地质与第四纪地质》1990,10(3):47-58

作者对有孔虫壳体沉降速度进行了测试和研究,提出了不同属种有孔虫的壳径与沉降速度相关方程,引进了“当量直径”的概念,并用于长江口三角洲地层中的化石群,提出了解释潮汐河口有孔虫埋葬群的形成机理,从而定量的研究和辨别三角洲地层中的原地埋葬和异地埋葬化石群。  相似文献   

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada     

Carl L. Amos  Ian G. Droppo  Eduardo A. Gomez  Tom P. Murphy 《Sedimentology》2003,50(1):149-168

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.  相似文献   

Measurement and research method of metallogenic depths of Jiaojia orefield and Linglong orefield Shandong Province, China   总被引：1，自引：0，他引：1  

Guxian Lü 《中国科学D辑(英文版)》1997,40(5):449-455

Taking the contribution of the tectonic force to the total hydrostatic pressure into account, the author puts forward a new method on the calculation of the depth of petrogenesis and metallogenesis which is summarized as follows: first the tectonic added hydrostatic pressured P_s is subtracted from the total hydrostatic pressure P, then using their difference P_r, according to the general method the depth of petrogenesis and metallogenesis can be determined in consideration of lateral constraint. By the new method the following data on the depths of the metallogenesis are obtained: 2 243.6 m (No. I and No. II veins with metallogenic epoch of 105 Ma) and 1 632. 38 m (No. III vein with 105 Ma) for Jiaojia orefield, and 3 454.97 m (NE-trending zone with 213.2 Ma), 1 902.79 III (ENE-trending zone with 100.28 Ma), 1 090.97 m (NE-trending zone with 80.67 Ma) and 720.55 m (NNE-trending zone with 71.86 Ma) for Linglong orefield. Project supported by the Foundation of the State Planning Commission, China and the Foundation of the State Science and Technology Commission, China.  相似文献